Doosan DX340LCV Hydraulic Final Drive Motor

Da max:30 mm; Radial clearance class:C3; rs min:0.3 mm; Brand:SNR; Max operating temperature, Tmax:120 °C; Mass:0.04 kg; B:13 mm; Nlim:14,000 rpm; Dynamic load, C:5.5 kN; Min operating temperature, Tmin:-20 °C;

A1:16 mm; J:202 mm; H3:130; B:65.1 mm; Designation of bearing:UC212-38G2; T max.:100 °C; Weight:3.73 kg; A2:69.7 mm; s1:32.55 mm; S:25.4 mm;

L1:225 mm; Z:54.4 mm; Designation of open end cover:SCOU207-21; H:98 mm; s1:21.45 mm; C0:15.2 kN; Recommended tightening torque for set screw:8 Nm; Weight:2.02 kg; T max.:100 °C; Designation of housing:SP206-207/72N-;

Bearing Part Number:628; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):13; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Days to Ship:7 Days; Flange Shape:Square Type; Shape:Flanged Pilot Type;

s1:21.75 mm; Dz:100 mm; J:159 mm; N:20mm; Z:74.6 mm; Designation of open end cover:SCOU210-31; Designation of housing:PH210N-; H2:165 mm; H1:22 mm; Weight:3.7 kg;

Number of Bearings:Double; Days to Ship:8 Days; Flange Shape:Compact Type; Bearing Material:Stainless Steel; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Type:Bearings with Housin; Flange O.D. H(φ):41; Width T(mm):25 ～ 50; Holder Surface Treatment:Not Provided;

Basic Load Rating, Static Rating(N):3850; Unit Body Material:Stainless Steel; Diameter series symbol:Used for Light load; Surface Treatment:No; Unit Body Material:Stainless Steel; Rolling Element Material:Stainless Steel; Bearing Inner Dia. Shape:Cylindrical Bore Set; RoHS:6; Pillow Type, Category:S

Type:Bearings with Housin; Bearing Retained:No; Width T(mm):25 ～ 40; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; RoHS:6; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing I.D. d(mm):12;

Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Number of Bearings:Double; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Flange O.D. H(φ):44; Bearing I.D. d(mm):15;

C:31.85 kN; d:41.28 mm; A1:13 mm; Recommended tightening torque for set screw:8 Nm; N:14mm; G:R1/8"; e:24 mm; T max.:100 °C; L:137 mm; S:19 mm;

E:18 mm; H1:13 mm; J:66 mm; Weight:1.08 kg; B:23.8 mm; H:42.9 mm; A:48 mm; Dz:70 mm; C:19.5 kN; s1:27.8 mm;

da max:44 mm; Radial clearance class:C4; d1:44 mm; B:17 mm; d:35 mm; D1:62.7 mm; Characteristic cage frequency, FTF:0.4 Hz; da min:41.5 mm; Characteristic outer ring frequency, BPF0:3.56 Hz; Min operating temperature, Tmin:-20 °C;

Radial clearance class:CN; Characteristic inner ring frequency, BPFI:5.42 Hz; Characteristic outer ring frequency, BPF0:3.58 Hz; da max:39 mm; Nlim (grease):11,000 rpm; Min operating temperature, Tmin:-25 °C; Dynamic load, C:19.5 kN; Characteristic rolling element frequency, BSF:4.68 Hz; da min:35 m

Designation of bearing:EX203G2; A:25.5 mm; B1:43.5 mm; Z:22.7 mm; e:15 mm; T min.:-20 °C; G:M6x1; C0:6.65 kN; A2:41.5 mm; J:78 mm;

Surface Treatment:No; Fit:J7; Accessory:No Cover; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; d:65; Fit:J7; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):57200;